HP printers can fail, despite being reliable printing machines. Why? Many reasons can cause HP printers to malfunction and display error messages. Below are 10 common problems with HP printers and their solutions.
Toner doesn’t fix or smear the page
Make sure to inspect the fuser. If the fuser is at its end, replace it. If you are unsure how to replace a fuser in your HP printer setup kit, refer to the HP printer support manual. Sometimes, the fuser displays a Clean Fuser Input message. This message is a sign that your fuser needs cleaning. Open the HP printer’s door. If there is a blue brush in the door, it must be there. You can reach the fuser input section by taking the toner cartridge off the printer.
You’ll find it on the top of the black cartridge port. The blue brush can be taken out to clean the assembly. The HP Color LaserJet5500 printer is the intended target audience for this cleanup procedure. Refer to the manual if you have a different printer. hp printer offline If the fuser is not working, the toner cartridge may be damaged at the end. If that happens, you’ll need to replace it. If the toner cartridge is still in good condition, you can clean it.
Paper jams are among the most common printer problems. They can occur with any printer brand or model, as well as HP printers. A paper jam can be caused by a variety of factors, such as paper jammed, torn pieces, incorrect paper tray selection, wrong paper type, loose paper roller, and dust. Take a look at the paper tray, and where the paper is leaving the printer paper. Take out any pieces of paper that are stuck in the paper tray. Verify that the paper tray is the right type of paper according to the control panel.
A paper jam will occur if the type of paper is different. Verify that the paper type is the same as what’s in the printer properties. If it does not match, rectify it. You should also ensure that your printer prints to the correct paper tray. Failure to do this will cause a paper jam. The roller should be tightened if it appears to be loose. It may be time to replace the roller if the roller appears shiny. Don’t pull paper in the opposite direction. Always pull it in a paper path direction.
Windows sends printing jobs to an incorrect printer
It occurs when Windows automatically selects a default printing device. Windows 7 users will need to click the Start button and point towards Devices and Printers. Under Printer and Faxes, you will find a variety of printers. Right-click the desired printer, and then click Set as Default Printer. When asked, confirm the action and exit Devices and Printers. Restart your computer. Recheck the page you have printed and test it again. Windows should print to the correct printer.
Windows XP users should click the Start button and then point to Control Panel. Double-click Hardware & Sound and then Printers. Find the printer you want to use as your default printer, click it, and then select Set as Default Printer.
The Print Spooler stop working
This is another common issue with HP printers. Click the Start button to fix this issue. Enter services.msc’ without the quotes and hit Enter to open the Run dialog box. This will bring up the Services window. You will see Print Spooler on the right side. Click it to open and choose Restart. After being prompted, confirm your action and close the Services window. If prompted, restart your computer. After it is done, you can print the page.
50.4 error message
The error message means that there is a power supply problem. This usually happens when the printer’s power cord plugs into the UPS or power strip. You can get rid of the error message by connecting your printer to a power outlet.
Printouts are too light, have Spots
Sometimes a printer will print very light or poorly if its ink cartridge is either dry or clogged. Take out the ink toner. Dip a soft towel in hot water or alcohol. Next, carefully rub the soft fabric against the printer’s head. The ink will be softer and the printer will print correctly. Reinstall the ink cartridge. Print a test sheet and then check again.
Error Message 69. x
This is a temporary problem with your printer. You can make this message disappear by turning off your printer for 10-15 seconds, then switching it on. This will reset all configurations and restart your printer. If you still get the message, power off the printer and computer. Then turn them back on.
Error message 10
The error means that there is a Supplies Memory Problem. There are many reasons why the error might occur depending on which model HP printer you have. The problem can be fixed by turning off the printer and unplugging it from the power socket. my printer is showing offline how to fix The printer should be turned off for at least 10 seconds before you plug it back in. Once it’s done, plug the printer into the power outlet again and allow it to warm up. After printing a test page, make sure to check it again. Now your printer should be operational. You may also have a problem with the printer’s memory. Replace the memory stick.
It may be that you want your printed page to contain a large text amount, but your default printer settings may not allow this. Sometimes, shrinking text on a sheet can be a challenge. You can adjust the printer settings to allow for more pages per sheet. To change the printer settings, click on the drop-down menu in Pages per Sheet and Posters and choose 2 or 3. Click the OK icon. You may need to adjust the settings depending on your printer model.
Wireless printer problems
Wireless printers are great for office and home use. Wireless printers are slower than wired printers, however. Many wireless printer users experience printer slowdowns. A unique channel number is necessary to ensure that your wireless printer operates at a reasonable speed. Keep cordless phones and security alarms far from your wireless router. These gadgets cause interference to the electrical system and slow down printer performance.